Madha Nagar, Kundrathur,Chennai-69.
Mon-Fri 9:00A.M. - 5:00P.M.
The Department of Electrical and Electronics Engineering (EEE) was started in 1998 at the inception of our college with the primary objective of delivering value based education along with practical knowledge to the aspirants in this field who would be assets to the society and the nation at large. The Department got accredited in 2004 by National Board of Accreditation (NBA), New Delhi for a period of 3 years and renewed successfully in the consecutive years. The Department continues to show its immense responsibility of growing individuals into graduates with high technical platform on Electrical and Electronics areas.
With well qualified faculty cadre, the department strives to update the young students in all recent aspects in a systematic manner. Meanwhile, it also cultures discipline, punctuality and Leadership qualities to students which help them grow into a professional. Enrich, Enlighten and Escalate (EEE) are the principles of the department and the activities that are conducted focusing the principles evolved help students to grow up day by day into engineers with high electrical strength technically.
Anna University, being convinced with the performance and facilities available in the department, awarded permanent affiliation. Among one of the oldest Departments in the college, it had shown that the faculties along with the facilities are enormously enough to build up young Electrical minds to serve the nation.
1. Find employment in Core Electrical and Electronics Engineering and service sectors.
2. Get elevated to technical lead position and lead the organization
competitively.
3. Enter into higher studies leading to post-graduate and research degrees.
Become consultant and provide solutions to the practical problems of core organization.
4. Become an entrepreneur and be part of electrical and electronics product and service
industries.
1. Engineering knowledge: Apply knowledge of mathematics, basic science and
engineering science.
2. Problem analysis: Identify formulate and solve engineering problems.
3. Design/development of solutions: Design an electrical system or process to improve its
performance, satisfying its constraints.
4. Conduct investigations of complex problems: Conduct experiments in electrical and electronics systems and interpret the data.
5. Modern tool usage: Apply various tools and techniques to improve the efficiency of the system.
6. The Engineer and society: Conduct themselves to uphold the professional and social obligations.
7. Environment and sustainability: Design the system with environment consciousness and sustainable development.
8. Ethics: Interacting industry, business and society in a professional and ethical manner.
9. Individual and team work: Function in a multidisciplinary team.
10. Communication: Proficiency in oral and written Communication.
11. Project management and finance: Implement Cost effective and improved system.
12. Life-long learning: Continue professional development and learning as a life-long activity.
On completion of Electrical and Electronics Engineering program, the student will have the
following Program Specific Outcomes.
1. Foundation of Electrical Engineering: Ability to understand the principles and working of electrical components, circuits, systems and control that are forming a
part of power generation, transmission, distribution, utilization, conservation and energy saving. Students can assess the power management, auditing, crisis and
energy saving aspects.
2. Foundation of Mathematical Concepts: Ability to apply mathematical methodologies to solve problems related with electrical engineering using appropriate engineering tools and algorithms.
3. Computing and Research Ability: Ability to use knowledge in various domains to
identify research gaps and hence to provide solution which leads to new ideas and
innovations.
| Semester | Course Code | Course Title | Course Outcome |
|---|---|---|---|
| I | HS8151 | Communicative English | • Read articles of a general kind in magazines and newspapers. • Participate effectively in informal conversations; introduce themselves and their friends and express opinions in English. • Comprehend conversations and short talks delivered in English • Write short essays of a general kind and personal letters and emails in English |
| I | MA8151 | Engineering Mathematics - I | After completing this course, students should demonstrate competency in the following skills: • Use both the limit definition and rules of differentiation to differentiate functions. • Apply differentiation to solve maxima and minima problems. • Evaluate integrals both by using Riemann sums and by using the Fundamental Theorem of Calculus. • Apply integration to compute multiple integrals, area, volume, integrals in polar coordinates, in addition to change of order and change of variables. • Evaluate integrals using techniques of integration, such as substitution, partial fractions and integration by parts. • Determine convergence/divergence of improper integrals and evaluate convergent improper integrals. • Apply various techniques in solving differential equations. |
| I | PH8151 | Engineering Physics | Upon completion of this course, • The students will gain knowledge on the basics of properties of matter and its applications, • The students will acquire knowledge on the concepts of waves and optical devices and their applications in fibre optics, • The students will have adequate knowledge on the concepts of thermal properties of materials and their applications in expansion joints and heat exchangers, • The students will get knowledge on advanced physics concepts of quantum theory and its applications in tunneling microscopes, and • The students will understand the basics of crystals, their structures and different crystal growth techniques |
| I | CY8151 | Engineering Chemistry | • The knowledge gained on engineering materials, fuels, energy sources and water treatment techniques will facilitate better understanding of engineering processes and applications for further learning |
| I | GE8151 | Problem Solving and Python Programming | Upon completion of the course, students will be able to • Develop algorithmic solutions to simple computational problems • Read, write, execute by hand simple Python programs. • Structure simple Python programs for solving problems. • Decompose a Python program into functions. • Represent compound data using Python lists, tuples, dictionaries. • Read and write data from/to files in Python Programs |
| I | GE8152 | Engineering Graphics | On successful completion of this course, the student will be able to • Familiarize with the fundamentals and standards of Engineering graphics perform freehand sketching of basic geometrical constructions and multiple views of objects. • Project orthographic projections of lines and plane surfaces. • Draw projections and solids and development of surfaces. • Visualize and to project isometric and perspective sections of simple solids |
| I | GE8161 | Problem Solving and Python Programming Laboratory | Upon completion of the course, students will be able to • Write, test, and debug simple Python programs. • Implement Python programs with conditionals and loops. • Develop Python programs step-wise by defining functions & calling them. • Use Python lists, tuples, dictionaries for representing compound data. • Read and write data from/to files in Python |
| I | BS8161 | Physics and Chemistry Laboratory | • The students will be outfitted with hands-on knowledge in the quantitative chemical analysis of water quality related parameters |
| II | HS8251 | Technical English | • Read technical texts and write area- specific texts effortlessly. • Listen and comprehend lectures and talks in their area of specialisation successfully. • Speak appropriately and effectively in varied formal and informal contexts. • Write reports and winning job applications |
| II | MA8251 | Engineering Mathematics - II | After successfully completing the course, the student will have a good understanding of the following topics and their applications: • Eigen values and eigenvectors, diagonalization of a matrix, Symmetric matrices, Positive definite matrices and similar matrices. • Gradient, divergence and curl of a vector point function • Evaluation of line, surface and volume integrals using Gauss, Stokes and Green’s theorems and their verification. • Analytic functions, conformal mapping and complex integration. • Laplace transform and inverse transform of simple functions, properties, various related theorems and application to differential equations with constant coefficients. |
| II | PH8253 | Physics for Electronics Engineering | The end of the course, the students will able to • Gain knowledge on classical and quantum electron theories, and energy band structures, • Acquire knowledge on basics of semiconductor physics and its applications in various devices, • Get knowledge on magnetic and dielectric properties of materials, • Have the necessary understanding on the functioning of optical materials for optoelectronics, • Understand the basics of quantum structures and their applications in spintronics and carbon electronics. |
| II | BE8252 | Basic Civil and Mechanical Engineering | On successful completion of this course, the student will be able to • Appreciate the Civil and Mechanical Engineering components of Projects. • Explain the usage of construction material and proper selection of construction materials. • Measure distances and area by surveying • Identify the components used in power plant cycle. • Demonstrate working principles of petrol and diesel engine. • Elaborate the components of refrigeration and Air conditioning cycle |
| II | EE8251 | Circuit Theory | • Ability to analyse electrical circuits • Ability to apply circuit theorems • Ability to analyse transients |
| II | GE8291 | Environmental Science and Engineering | • Environmental Pollution or problems cannot be solved by mere laws. Public participation is an important aspect which serves the environmental Protection. One will obtain knowledge on the following after completing the course. • Public awareness of environmental is at infant stage. • Ignorance and incomplete knowledge has lead to misconceptions • Development and improvement in std. of living has lead to serious environmental disasters |
| II | GE8261 | Engineering Practices Laboratory | On successful completion of this course, the student will be able to • Fabricate carpentry components and pipe connections including plumbing works. • Use welding equipment to join the structures. • Carry out the basic machining operations • Make the models using sheet metal works • Illustrate on centrifugal pump, Air conditioner, operations of smithy, foundry and fittings • Carry out basic home electrical works and appliances • Measure the electrical quantities • Elaborate on the components, gates, soldering practices |
| II | EE8261 | Electric Circuits Laboratory | • Understand and apply circuit theorems and concepts in engineering applications. • Simulate electric circuits |
| III | MA8353 | Transforms and Partial Differential Equations | Upon successful completion of the course, students should be able to: • Understand how to solve the given standard partial differential equations. • Solve differential equations using Fourier series analysis which plays a vital role in engineering applications. • Appreciate the physical significance of Fourier series techniques in solving one and two dimensional heat flow problems and one dimensional wave equations |
| III | EE8351 | Digital Logic Circuits | • Ability to design combinational and sequential Circuits. • Ability to simulate using software package. • Ability to study various number systems and simplify the logical expressions using Boolean functions • Ability to design various synchronous and asynchronous circuits. • Ability to introduce asynchronous sequential circuits and PLDs • Ability to introduce digital simulation for development of application oriented logic circuits |
| III | EE8391 | Electromagnetic Theory | • Ability to understand the basic mathematical concepts related to electromagnetic vector fields. • Ability to understand the basic concepts about electrostatic fields, electrical potential, energy density and their applications. • Ability to acquire the knowledge in magneto static fields, magnetic flux density, vector potential and its applications. • Ability to understand the different methods of emf generation and Maxwell’s equations • Ability to understand the basic concepts electromagnetic waves and characterizing parameters • Ability to understand and compute Electromagnetic fields and apply them for design and analysis of electrical equipment and systems |
| III | EE8301 | Electrical Machines - I | • Ability to analyze the magnetic-circuits. • Ability to acquire the knowledge in constructional details of transformers. • Ability to understand the concepts of electromechanical energy conversion. • Ability to acquire the knowledge in working principles of DC Generator. • Ability to acquire the knowledge in working principles of DC Motor • Ability to acquire the knowledge in various losses taking place in D.C. Machines |
| III | EC8353 | Electron Devices and Circuits | Upon Completion of the course, the students will be ability to: • Explain the structure and working operation of basic electronic devices. • Able to identify and differentiate both active and passive elements • Analyze the characteristics of different electronic devices such as diodes and transistors • Choose and adapt the required components to construct an amplifier circuit. • Employ the acquired knowledge in design and analysis of oscillators |
| III | ME8792 | Power Plant Engineering | • Explain the layout, construction and working of the components inside a thermal power plant. • Explain the layout, construction and working of the components inside a Diesel, Gas and Combined cycle power plants. • Explain the layout, construction and working of the components inside nuclear power plants. • Explain the layout, construction and working of the components inside Renewable energy power plants. • Explain the applications of power plants while extend their knowledge to power plant economics and environmental hazards and estimate the costs of electrical energy production. |
| III | EC8311 | Electronics Laboratory | • Ability to understand and analyse electronic circuits |
| III | EE8311 | Electrical Machines Lab - I | • Ability to understand and analyze DC Generator • Ability to understand and analyze DC Motor • Ability to understand and analyse Transformers |
| IV | MA8491 | Numerical Methods | Upon successful completion of the course, students should be able to: • Understand the basic concepts and techniques of solving algebraic and transcendental equations. • Appreciate the numerical techniques of interpolation and error approximations in various intervals in real life situations. • Apply the numerical techniques of differentiation and integration for engineering problems. • Understand the knowledge of various techniques and methods for solving first and second order ordinary differential equations. • Solve the partial and ordinary differential equations with initial and boundary conditions by using certain techniques with engineering applications |
| IV | EE8401 | Electrical Machines - II | • Ability to understand the construction and working principle of Synchronous Generator • Ability to understand MMF curves and armature windings. • Ability to acquire knowledge on Synchronous motor. • Ability to understand the construction and working principle of Three phase Induction Motor • Ability to understand the construction and working principle of Special Machines • Ability to predetermine the performance characteristics of Synchronous Machines |
| IV | EE8402 | Transmission and Distribution | • To understand the importance and the functioning of transmission line parameters. • To understand the concepts of Lines and Insulators. • To acquire knowledge on the performance of Transmission lines. • To understand the importance of distribution of the electric power in power system. • To acquire knowledge on Underground Cabilitys • To become familiar with the function of different components used in Transmission and Distribution levels of power system and modelling of these components |
| IV | EE8403 | Measurements and Instrumentation | To acquire knowledge on Basic functional elements of instrumentation To understand the concepts of Fundamentals of electrical and electronic instruments Ability to compare between various measurement techniques To acquire knowledge on Various storage and display devices To understand the concepts Various transducers and the data acquisition systems Ability to model and analyze electrical and electronic Instruments and understand the operational features of display Devices and Data Acquisition System. |
| IV | EE8451 | Linear Integrated Circuits and Applications | Ability to acquire knowledge in IC fabrication procedure Ability to analyze the characteristics of Op-Amp To understand the importance of Signal analysis using Op-amp based circuits. Functional blocks and the applications of special ICs like Timers, PLL circuits, regulator Circuits. To understand and acquire knowledge on the Applications of Op-amp Ability to understand and analyse, linear integrated circuits their Fabrication and Application. |
| IV | IC8451 | Control Systems | At the end of the course, the student should have the : Ability to develop various representations of system based on the knowledge of Mathematics, Science and Engineering fundamentals. Ability to do time domain and frequency domain analysis of various models of linear system. Ability to interpret characteristics of the system to develop mathematical model. Ability to design appropriate compensator for the given specifications. Ability to come out with solution for complex control problem. Ability to understand use of PID controller in closed loop system. |
| IV | EE8411 | Electrical Machines Lab - II | At the end of the course, the student should have the : Ability to understand and analyze EMF and MMF methods Ability to analyze the characteristics of V and Inverted V curves Ability to understand the importance of Synchronous machines Ability to understand the importance of Induction Machines Ability to acquire knowledge on separation of losses |
| IV | EE8461 | Linear and Digital Integrated Circuits laboratory | At the end of the course, the student should have the : Ability to understand and implement Boolean Functions. Ability to understand the importance of code conversion Ability to Design and implement 4-bit shift registers Ability to acquire knowledge on Application of Op-Amp Ability to Design and implement counters using specific counter IC. |
| IV | EE8412 | Technical Seminar | Ability to review, prepare and present technological developments Ability to face the placement interviews |
| V | EE8501 | Power System Analysis | Ability to model the power system under steady state operating condition Ability to understand and apply iterative techniques for power flow analysis Ability to model and carry out short circuit studies on power system Ability to model and analyze stability problems in power system Ability to acquire knowledge on Fault analysis. Ability to model and understand various power system components and carry out power flow, short circuit and stability studies. |
| V | EE8551 | Microprocessors and Microcontrollers | Ability to acquire knowledge in Addressing modes & instruction set of 8085 & 8051. Ability to need & use of Interrupt structure 8085 & 8051. Ability to understand the importance of Interfacing Ability to explain the architecture of Microprocessor and Microcontroller. Ability to write the assembly language programme. Ability to develop the Microprocessor and Microcontroller based applications |
| V | EE8552 | Power Electronics | Ability to analyse AC-AC and DC-DC and DC-AC converters. Ability to choose the converters for real time applications. |
| V | EE8591 | Digital Signal Processing | Ability to understand the importance of Fourier transform, digital filters and DS Processors. Ability to acquire knowledge on Signals and systems & their mathematical representation. Ability to understand and analyze the discrete time systems. Ability to analyze the transformation techniques & their computation. Ability to understand the types of filters and their design for digital implementation. Ability to acquire knowledge on programmability digital signal processor & quantization effects. |
| V | CS8392 | Object Oriented Programming | Upon completion of the course, students will be able to: Develop Java programs using OOP principles Develop Java programs with the concepts inheritance and interfaces Build Java applications using exceptions and I/O streams Develop Java applications with threads and generics classes Develop interactive Java programs using swings |
| V | OCE551 | Air Pollution and Control Engineering | The students completing the course will have An understanding of the nature and characteristics of air pollutants, noise pollution and basic concepts of air quality management Ability to identify, formulate and solve air and noise pollution problems Ability to design stacks and particulate air pollution control devices to meet applicable standards. Ability to select control equipments. Ability to ensure quality, control and preventive measures. |
| V | EE8511 | Control and Instrumentation Laboratory | Ability to understand control theory and apply them to electrical engineering problems. Ability to analyze the various types of converters. Ability to design compensators Ability to understand the basic concepts of bridge networks. Ability to the basics of signal conditioning circuits. Ability to study the simulation packages. |
| V | HS8581 | Professional Communication | Make effective presentations Participate confidently in Group Discussions. Attend job interviews and be successful in them. Develop adequate Soft Skills required for the workplace |
| V | CS8383 | Object Oriented Programming Laboratory | Upon completion of the course, the students will be able to Develop and implement Java programs for simple applications that make use of classes, packages and interfaces. Develop and implement Java programs with array list, exception handling and multithreading . Design applications using file processing, generic programming and event handling. |
| VI | EE8601 | Solid State Drives | Ability to understand and suggest a converter for solid state drive. Ability to select suitability drive for the given application. Ability to study about the steady state operation and transient dynamics of a motor load system. Ability to analyze the operation of the converter/chopper fed dc drive. Ability to analyze the operation and performance of AC motor drives. Ability to analyze and design the current and speed controllers for a closed loop solid state DC motor drive. |
| VI | EE8602 | Protection and Switchgear | Ability to understand and analyze Electromagnetic and Static Relays. Ability to suggest suitability circuit breaker. Ability to find the causes of abnormal operating conditions of the apparatus and system. Ability to analyze the characteristics and functions of relays and protection schemes. Ability to study about the apparatus protection, static & numerical relays. Ability to acquire knowledge on functioning of circuit breaker. |
| VI | EE8691 | Embedded Systems | Ability to understand and analyze Embedded systems. Ability to suggest an embedded system for a given application. Ability to operate various Embedded Development Strategies Ability to study about the bus Communication in processors. Ability to acquire knowledge on various processor scheduling algorithms. Ability to understand basics of Real time operating system. |
| VI | EE8002 | Design of Electrical Apparatus | Ability to understand basics of design considerations for rotating and static electrical machines Ability to design of field system for its application. Ability to design sing and three phase transformer. Ability to design armature and field of DC machines. Ability to design stator and rotor of induction motor. Ability to design and analyze synchronous machines. |
| VI | EE8005 | Special Electrical Machines | Ability to analyze and design controllers for special Electrical Machines. Ability to acquire the knowledge on construction and operation of stepper motor. Ability to acquire the knowledge on construction and operation of stepper switched reluctance motors. Ability to construction, principle of operation, switched reluctance motors. Ability to acquire the knowledge on construction and operation of permanent magnet brushless D.C. motors. Ability to acquire the knowledge on construction and operation of permanent magnet synchronous motors. Ability to select a special Machine for a particular application. |
| VI | EE8661 | Power Electronics and Drives Laboratory | Ability to practice and understand converter and inverter circuits and apply software for engineering problems. Ability to experiment about switching characteristics various switches. Ability to analyze about AC to DC converter circuits. Ability to analyze about DC to AC circuits. Ability to acquire knowledge on AC to AC converters Ability to acquire knowledge on simulation software. |
| VI | EE8681 | Microprocessors and Microcontrollers Laboratory | Ability to understand and apply computing platform and software for engineering problems. Ability to programming logics for code conversion. Ability to acquire knowledge on A/D and D/A. Ability to understand basics of serial communication. Ability to understand and impart knowledge in DC and AC motor interfacing. Ability to understand basics of software simulators. |
| VI | EE8611 | Mini Project | On Completion of the mini project work, students will be in a position to take up their final year project work and find solution by formulating proper methodology |
| VII | EE8701 | High Voltage Engineering | Ability to understand Transients in power system. Ability to understand Generation and measurement of high voltage. Ability to understand High voltage testing. Ability to understand various types of over voltages in power system. Ability to measure over voltages. Ability to test power apparatus and insulation coordination |
| VII | EE8702 | Power System Operation and Control | Ability to understand the day-to-day operation of electric power system. Ability to analyze the control actions to be implemented on the system to meet the minute-to-minute variation of system demand. Ability to understand the significance of power system operation and control. Ability to acquire knowledge on real power-frequency interaction. Ability to understand the reactive power-voltage interaction. Ability to design SCADA and its application for real time operation. |
| VII | EE8703 | Renewable Energy Systems | Ability to create awareness about renewable Energy Sources and technologies. Ability to get adequate inputs on a variety of issues in harnessing renewable Energy. Ability to recognize current and possible future role of renewable energy sources. Ability to explain the various renewable energy resources and technologies and their applications. Ability to understand basics about biomass energy. Ability to acquire knowledge about solar energy. |
| VII | OEC753 | Signals and Systems | At the end of the course, the student should be able to: To be able to determine if a given system is linear/causal/stable Capable of determining the frequency components present in a deterministic signal Capable of characterizing LTI systems in the time domain and frequency domain To be able to compute the output of an LTI system in the time and frequency domains |
| VII | GE8071 | Disaster Management | The students will be ability to Differentiate the types of disasters, causes and their impact on environment and society Assess vulnerability and various methods of risk reduction measures as well as mitigation. Draw the hazard and vulnerability profile of India, Scenarios in the Indian context, Disaster damage assessment and management. |
| VII | GE8077 | Total Quality Management | The student would be able to apply the tools and techniques of quality management to manufacturing and services processes. |
| VII | EE8711 | Power System Simulation Laboratory | Ability to Ability to understand power system planning and operational studies. Ability to acquire knowledge on Formation of Bus Admittance and Impedance Matrices and Solution of Networks. Ability to analyze the power flow using GS and NR method Ability to find Symmetric and Unsymmetrical fault Ability to understand the economic dispatch. Ability to analyze the electromagnetic transients. |
| VII | EE8712 | Renewable Energy Systems Laboratory | Ability to understand and analyze Renewable energy systems. Ability to train the students in Renewable Energy Sources and technologies. Ability to provide adequate inputs on a variety of issues in harnessing Renewable Energy. Ability to simulate the various Renewable energy sources. Ability to recognize current and possible future role of Renewable energy sources. Ability to understand basics of Intelligent Controllers. |
| VIII | GE8076 | Professional Ethics in Engineering | Upon completion of the course, the student should be ability to apply ethics in society, discuss the ethical issues related to engineering and realize the responsibilities and rights in the society. |
| VIII | EE8017 | High Voltage Direct Current Transmission | Ability to understand the principles and types of HVDC system. Ability to analyze and understand the concepts of HVDC converters. Ability to acquire knowledge on DC link control. Ability to understand the concepts of reactive power management, harmonics and power flow analysis. Ability to get knowledge about Planning of DC power transmission and comparison with AC power transmission. Ability to understand the importance of power flow in HVDC system under steady state. |
| VIII | EE8811 | Project Work | On Completion of the project work students will be in a position to take up any challenging practical problems and find solution by formulating proper methodology. |
150
Companies Visited
2000
Offer Issued
50
MOU's
10
International Collaboration
